[Korean-English] - [한영]

Added by: 관리자

Updated: Dec 15, 2020, 9:23:59 AM

소둔 (燒鈍)

★ annealing 소둔(燒鈍), 풀림
[뜻] 재료를 고온으로 장시간 유지시킨 후 서서히 냉각하는 열처리.
* box annealing 상자 소둔.
* bright annealing 광휘 소둔.
* complete annealing 완전 소둔.
* continuous annealing 연속 소둔.
* decarburization annealing 탈탄 소둔.
* diffusion annealing 확산 소둔.
* full annealing 완전풀림처리, 완전 소둔.
* injection annealing 주입 소둔.
* intermediate annealing 중간 소둔.
* isochronal annealing 등시성 소둔.
* isothermal annealing 등온 소둔.
* low temperature annealing 저온 소둔.
* purification annealing 순화 소둔.
* quantum annealing 양자 소둔.
* quench annealing 열처리 소둔.
* reduction annealing 환원 소둔.
* regular annealing 중간 소둔.
* spherodizing annealing 구상화 소둔.
* Full annealing [Figure 2–13(a)] is performed by heating the steel above the upper critical temperature
and holding it until the composition is uniform. Then the steel is cooled very slowly in the furnace to below the lower critical temperature. Slow cooling to room temperature outside the furnace completes the process. This treatment produces a soft, low-strength form of the material, free of significant internal stresses. Parts are frequently cold-formed or machined in the annealed condition. Stress relief annealing [Figure 2–13(b)] is often used following welding, machining, or cold-forming to relieve residual stresses and thereby minimize subsequent distortion. The steel is heated to approximately 1000°F to 1200°F (540°C–650°C), held to achieve uniformity, and then slowly cooled in still air to room temperature.
[출처: Robert L. Mott, Edward M. Vavrek, Jyhwen Wang, Machine Elements in Mechanical Design]