[Korean-English] - [한영]

Added by: 관리자

Updated: Nov 10, 2020, 11:02:58 AM

용융방사

★ melt spinning 용융 방사. 
* Melt spinning is used when the starting polymer can best be processed by heating to the molten state and pumping through the spinneret, much in the manner of conventional extrusion. A typical spinneret is 6 mm (0.25 in) thick and contains approximately 50 holes of diameter 0.25 mm (0.010 in); the holes are countersunk, so that the resulting bore has an L/D ratio of only 5/1 or less. The filaments that emanate from the die are drawn and simultaneously air cooled before being collected together and spooled onto the bobbin, as shown in Figure 13.18. 
[출처: Mikell P. Groover, Fundamentals of Modern Manufacturing Materials, Processes, and Systems]
 
★ meltblown spinning